Turbonet

From NZTivo

Installation

At the front end of of the Tivo Mainboard you will see what looks like a PC Card pin arrangement.

Note that the motherboard is held in place by some small metal clips, you might need to use some pliers to straighten a couple of them out so that the Turbonet card can slot in.

Just plug in the Turbonet card and run a Cat5 network cable thru the little slot in the back (next to the fan) and plug it in, you have to bend up the little metal tab in order to get it in. Might be a good idea to tape the cable up a little.

Eklectic Systems' Turbonet Installation How To - With Images:

http://www.eksys.com/turbo_install.html